Panasonic KX-E3000 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In order to begin, yon must first have one of yonr forms to work with.
Depress CODIi+TAIi CLEAR to clear existing margins and tabs
Set both margins at the edge of the form and depress RETURN
Remove the form from the typewriter
Depress CODE +EXPR. to enter forms layout
Type the number 1 or
2,
whichever number you wish to assign
Remember, yon may store 2 forms with a total of
8
stops per form.
Auto insert the form
Using the following keys, advance the printer to the desired stop positions:
STORING THE LAYOUT
RETURN
SPACE BAR
BACKSPACE
HALF SPACE
CODE+HALF SPACE (Incremental space)
INDEX(
¿
)
REVERSE INDEX (
^
)
SHIFT+INDEX
SHI FT-^REVERSE INDEX
Depress TAB SET at each .stop location
Depress CODE+EXPR. to end the form
NOTE: If the auto insertion point is changed after the form is set up, the programmed stops will not align
properly. Therefore, it is suggested that a blank form noting the original Insertion point he saved so the
ifisertion point can be reset.
34