Panasonic KX-E3000 - Manual (Page 25)

Depress SPACE BAR to position the printer over the error
Depress CODE a CANCEL f<xj) once
Retype the incorrect character
This will lift the character off the paper.
Type the correct character
Repeat the steps outlined above for each incorrect character on the same line.
Depress RELOC
This positions the printer at the last printed character or REl'URN.
* If you have more than one correction to be made out of the 500 character correction memory, you must RETURN
to position the printer at the left margin in order to REVERSE INDEX ( ]') to the next error.
NO PRINT WHEN MAKING MANUAL CORRECTIONS
When an error is out of the 500 character correction memory, the PRINT key may he used as a stencil key to re-enter
text into the correction memory without reprinting. This feature is especially useful when correcting words or
consecutive errors.
After reaching the end of the correction memory:
Depress CODE-VCANCEL to exit the correction memory
Depress REVERSE INDEX ( ^ ) to position printer on the desired line
SPACE to position printer over the first character of the incorrect character(s)
Depress the PRINT key and retype the character(s) exactly as the appear on paper
CANCEL ( <^ ) to delete the error(s)
Retype correct character(s)
Depress RELOC
19