Using one-touch/abbr. number dialing, Using manual number dialing, Essing – Panasonic 990 User Manual
Page 127: Tf® §©oixâ a [d)c2xgq00dd(mls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
essing
TF® §©OiXâ a [D)C2XgQ00DD(MlS
Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
1
^
ENTER STATION(S)
THEN PRESS START
00
%
Set document(s) face down.
Ex:
<01>(Station name)
5551234s2762
STORE *
N0.001
PAGES=001 01%
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
Using Manual Number Dialing
Use ISUB-ADDRI to separate the Telephone number and the Sub-address.
1
^
ENTER STATION(3)
THEN PRESS START 00%
Set document(s) face down.
SUB-ADDR then
Enter the telephone number, press
enter the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as; (5) (5) (5) © @ @ ( 4 )
sub
-
ad
'
dr
I(^(7)@@
TEL. NO.
5551234S2762I
STORE *
N0.001
PAGES=001 01%
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
C NOTE
1.
ISUB-ADDRI
separates the Sub-address from the Telephone number and is indicated by an
"s"
in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
127