Panasonic 990 - Manual (Page 131)

Journals and Lists
0 1 t?glDDgÌM]teg0®OO ora
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted
or received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
(16) Type of communication
(17) Destination
(18) Received remote station's ID
(19) Resolution
"OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"B-OK" indicates that the Batch Transmission was successful.
(All batched files are listed beiow the batched transaction.)
"M-OK" indicates that the substitute reception message in memory was not
printed out.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Confidential Communication was successful.
"3-digit Info Code (See page 141) indicates that the communication has failed.
The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully transmitted.
The second 3-digit number represents the total number of pages that were
attempted to be transmitted.
Asterisk indicates that the quality of some received copies was poor.
001 to 999 (If the communication is stored into memory, a file number is assigned
for each communication.)
"XMT' means Transmission
"RCV” means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
"RMT means Remote Diagnostic
Name : Recorded name in One-Touch or ABBR, Numbers or remote station's
Character ID.
a number; Dialed telephone number
Number : Remote station's ID number.
For service personnel only
Up to 26 characters
Up to 20 digits
Up to 16 characters
Transmission or memory transmission
If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number/Recorded Name
If not: Telephone number
Character ID or ID number
"STD" means standard resolution
"FINE" means fine resolution
"S-FINE" means super fine resolution
131