Receiving, Documents – Panasonic 990 User Manual

Page 64

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Receiving

Documents

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically

starts receiving documents into its image data memory. Stored documents are printed automatically after

replacing the recording paper or the toner cartridge. {See Note 1 and 2)

1

When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.

Install the recording paper (See page 20) or replace the

toner cartridge (See page 18).

The machine will automatically start printing the document

stored in the memory.

NO RECORDING PAPER

INFO. CODE=010

OUT OF TONER

INFO. CODE=041

* PRINTING *

MEMORY RCV'D DOC

The printing mechanism of your machine is a Reverse Order Stacking construction. Your machine has a

Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is

enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.

The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT

COLLATION set to “Valid”, and 2) enough remaining memory.

The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements

is not met.

To use this function, we recommend installing an Optional Flash Memory Card. See page 156 (Options and

Supplies).

m

C

NOTE )

1. If the memory overflows, the machine will stop receiving and release the communication line.

The document(s) stored in the memory up to that moment will be printed out

2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter

No. 22 to "Invalid". (See page 36}

64

Advertising