Set document(s) face down, Make sure that the lamp goes off, Enter a telephone number from the keypad – Panasonic 990 User Manual
Page 52: Your machine starts to dial the telephone number, Sending documents, D (d
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
-4
@00
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
^
3
4
Set document(s) face down.
MEMORY
Make sure that the lamp goes off.
Enter a telephone number from the keypad.
Ex;
(D (D
® © @
(D ®
Your machine starts to dial the telephone number.
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
00
%
]
PRESS START TO DIAL
55512341
* DIALING *
5551234
52
NOTE
3
1- If you need a special access number to get an outside line, dial it first then press
i PAUSE
I
fo
enter a pause (represented by a before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
I
TONE
I
(represented by a
The dialing mode will be changed from Pulse to Tone after dialing the digit
7".
Ex: 9 PAUSE TONE 5551234
3.
To stop the transmission, press
I
STOP
I
.
The display shows:
COMMUNICATION
STOP?
I:YES 2:NO
1
Press
(T) fo
stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.