Panasonic CQ-DF802U - Manual (Page 31)

Caution:
• Only 5" (12 cm) CD, CO-DA data recorded CD-R and CD-RW discs are available for this unit.
• This unit does not support CO text display.
• This unit does not support MP3 disc playback.
• Refer to page 53 about notes on CD-Rs/RWs.
• To avoid damaging the front panel, do not push it down or place objects on it while it is open.
• Do not use irregular shaped discs.
• Do not use discs that have a seal or label attached.
• Do not insert foreign matter into the disc slot.
• The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do
not touch anything here except E^] (eject).
• The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Be care­
ful when inserting a disc or pressing [^1 (eject).
Listening to a CD
CD Player Mode
(When a CD is in the player.)
Press irf<W;MJ/[SOURCE] to change to CD
player mode.
Playback starts automatically.
Track Selection
^ /[>]: Advance to the next track.
^ /[<]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Track Search
Press and hold.
^ /[>]: Fast forward
^ /[<]: Fast backward
Release to resume the regular play.
Pause
Press [BAND] (■■/►).
Press
[BAND! (I !/►) again to cancel.
PAUSE
Direct Track Selection
Only for the remote control unit
Example: track number 10
© Press [#] (NUMBER).
T)
Jj
TRACK
i
1
r
Tí
JJ
10 0''02
© P r e s s [11 [0].
@ Press tSETl to set.
The corresponding track starts playing.
Note:
• Press 1 d /SPMK1/[DISP1 (display) or [#] (NUM­
BER) to return to the regular mode.
• If a non-existent track number is input and en­
tered, the command is invalid and the display re­
turns to regular mode.
Display Change
Press |o/SPM/|/[DISP] (display) to change the dis­
play.
Track number/track
playing time (Default)
Clock display
CQ-DF802U
31