Panasonic KX-FP101 - Manual (Page 21)

Setup
Date and time, your logo and facsimile
telephone number
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991
Setting the date and time
^ Press [MENU].
2
Display;
Press then (o][T].
1.SYSTEM SET UP
SET DATE & TIME
Press (START/SET/COPY].
M :Q1/D:
I---
01/Y:99
Cursor
Enter the correct month/day/year by selecting
each 2 digits using the dial keypad.
Example: Aug. 10, 1999
Press [SEmSld]®.
M:fi8/D:10/Y:99
5
6
Press (START/SET/COPY).
TIME: 12:00AM
Enter the correct hour/minute by selecting
each 2 digits using the dial keypad.
Press 0 to select “AM” or “PM”.
Example: 3:15PM
1. Press [O][I]0[I]-
TIME: 03:15AM
2. Press 0 until “PM” is displayed.
TIME: ¿3:15PM
Press (START/SET/COPY 1.
SETUP ITEM [ ]
8 Press (MENU).
(MENU)
o
OCDCD ^
OCDCD
©OCD,
o c
0 G
0 0
(STOP]
(START/S
o &
Q
ËT/COPY]
[JOG DIAL]
Note:
• You can enter the number by rotating
[JOG DIAL] in steps 4 and 6. In this case,
press (g to move the cursor.
• The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
• Press (◄] or (3 to move the cursor to the
incorrect number, then make the correction.
• If you press [STOP] while programming, the
display will return to the previous one.
2 .
■D
O
*o
10
fl>
o
3
21