Panasonic KX-FP101 - Manual (Page 48)

Sending Faxes
Multiple stations
This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or JOG DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial keys 1,2 or 3).
Important:
• Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or JOG DIAL directory.
• The BROADCAST keys can be used as One-Touch Dial keys 1,2 or 3 or as broadcast keys. These functions
cannot be used at the same time.
Programrning the BROADCAST keys with telephone numbers
1
2
3
Press iDIRECTORY PROGRAM).
Display: PRESS STATION
OR USE JOG-DIAL
Press one of the [BROADCAST] keys.
DIAL MODE
Press ® or (S to select “BROADCAST’.
Example: broadcast 1 ▼A
Press ISTART/SET/COPY].
DIR=
[
0 0 0
]
Enter the station.
a: Using the One-Touch Dial:
For stations 1-3 which are not used as
(BROADCAST] keys, press the preset
One-Touch Dial key. __________
For stations 4-6, press (LOWER], then press
the preset One-Touch Dial key.
Example: DIR=Luke
[
0 0 1
]
b: Using the JOG DIAL directory:
Rotate ( jog DIAL] until the desired name is
displayed.
Example: John
[
0 0 1
]
Press (START/SET/COPY].
Example: DIR=John [ 0 0 2 ]
• To enter other stations, repeat this step (up to
20 stations).
Press [START/SET/COPY] after entering
all of the desired stations.
REGISTERED
PRESS STATION
OR USE JOG-DIAL
• To program another BROADCAST key,
repeat steps 2 to 6.
Press [DIRECTORY PROGRAM] to exit
the program.
®/®
[BROADCAST)/
One-Touch Dial keys
©®CD
(DCD® ^
®®® o c
o
D l o K
[STOP]
[START/SET/COPY]
3
O
nt
[JOG DIAL]
[LOWER]
[DIRECTORY PROGRAM]
Note:
• If you make a mistake while programming,
press [ stop ], then make the correction.
• Confirm the stored numbers by printing a
broadcast list (p. 87).
48