Sending a fax using the jog dial directory, Name/tel n0.1 [jog d, If your unit does not send a fax – Panasonic KX-FP101 User Manual
Page 39: Sending faxes, Standard, Alice, Fax=<alice, Connecting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
Sending a fax using the JOG DIAL directory
Before using this feature, program the desired names and telephone numbers into the directory (p. 32).
1
2
4
5
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document {up to 15 pages) FACE DOWN
until a single beep is heard and the unit grabs the
document.
Display:
STANDARD
If necessary, press [RESOLUTION
1
repeatedly to
select the desired setting (p. 37).
Rotate [
jog
DIAL] until the desired name is
displayed.
Example:
Alice
• To confirm the number, press [NAME/TEL NO.).
Press [START/SET/COPY].
FAX=<Alice>
I
CONNECTING,
*
. .
Document
Document guides
. . *
A /^^feeder tray
[ START/SET/COPY
[NAME/TEL N0.1
[JOG
D\^]
0)
o
■o
*<
• The unit will start transmission.
Helpful hints:
• You can confirm the stored items on the display (p. 35)
or on the telephone number list (p. 87).
• The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 51).
Note:
If the desired name has not been stored, press [STOP]
and dial the number manually.
For further details about using the JOG DIAL, see
page 35.
If your unit does not send a fax
Verify that the number dialed is answered by
the other party’s machine.
1. Rotate [JOG DIAL] until the desired name
is displayed.
2. Press [MONITOR).
39