Panasonic PV-8665S - Manual (Page 20)

Record On a Tape
*lmportant: If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
I^c
Check list before you begin.
Q All connections are made.
{See pages 6-9.)
Q VCR is plugged in.
Q TV is turned on and set to the VCR
channel (CH 3 or 4).
^CHANNEL j
£ Up/Down
\
..
4
li_______ —
m o
\\—
—Dm
Multi Function Display ^
1
Insert a cassette with record tab
• VCR power comes on automatically.
Press CH
A/W* *
or NUMBERED
keys to select a channel.
• Or, press CHANNEL A/V on the VCR.
• Holding down CH A/V will increase
the channel search speed.
• To record from an outside source,
press CH A/T or INPUT to select
“LINE1" or “LINE2" (see page 21).
Press SPEED to change the
recording speed.
• SP = Standard Play ,
LP = Long Play
SLP = Super Long Play
(See page 5.)
Press REC/TIME on the remote control or VCR to
start recording.
• To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After tile VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
Normal Ree—►0:30—*-1:00
L J
4:00-*—3:00*4—2:00*4-1:3Q
“TIMER” lights in the Multi Function Display.
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP to Stop recording.
• Or, press STOP/EJECT on the VCR.
20