3d-comb, Picture shift, Off timer – Panasonic TX-56P800H User Manual
Page 23: Ch colour set ycr/game, Child lock colour system, Blue back, Illumination, Fucker reduction
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2Э-ОСТ-2004
13:14 FROM
TO opgrating instr
P.23
1
2
SETUP
Press to display the SETUP MENU.
Press to select the desired function.
Press to adjust or change the
function,
3D-COMB
You can choose 3D-COMB junction ON or OFF, If the 3D-COMB
function is ON, dot interference or cross colour will be reduced.
Note:
Not available in component and RGB input.
PICTURE SHIFT
3
TV/AV
Press to go back to watching TV,
For use as a screen saver, this function changes the entire
picture position (shift) approximately
2
mm every 15 minutes.
During AV mode, the appearance of the SETUP MENU will differ
from that of the TV mode, with the following function adjustments
becoming available.
OFF TIMER
Switches the TV off within a preset time which you can choose
from between 0 to 90 rninutes in 15 minutes intervals.
O F F 1 5
3 0 ^ ^ 4 5
>90-*^”—
>75<
----------
CH COLOUR SET
YCR/GAME
Colour density varying between broadcast channels can be
adjusted to three levels
for
each reception channel.
Reproduction of irregular signals, such as certain TV games
and rental video tapes, may be improved.
CHILD LOCK
COLOUR SYSTEM
If the Child-Lock function is set ON, picture and sound of the TV/AV
mode being viewed will disappear and a Black screen will appear.
During AV mode, COLOUR SYSTEM is displayed,
If a dear picture with current colours cannot be obtained when
a Broadcast or AV signal is received, then the colour system
will change as shown.
j—^AUTO ^ PAL<—^SECAM-!^-^
NTSC3,58 ^NTSC4.43 ^
PAL, SECAM and NTSC 3.58 are different colour signal broadcast
BLUE BACK
You can choose Blue Back display ON or OFF when there is no signal.
ILLUMINATION
transmission systems applicable to differing countries, NTSC 4.43
i$ a trick playback mode used in special VCR to playback NTSC
Select “ON" to illuminate the ILLUMINATION LIGHT on the front
panel. Otherwise, select "OFF”.
recorded video tapes through PAL television equipment.
FUCKER REDUCTION
Lets you control any picture rnovement. Set to ON to activate
motion compensation, to smooth the image and get rid of picture
movement. Set to Off to have no flicker reduction at all,
occasional broadcasts may benefit from using this setting.
ON ^^ OFF
23