How to connect the “avi, 2,3 or 4” input terminals – Panasonic TX-56P800H User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
29-OCT-2004
13:13 FROM
TO opgrating instr
P.08
How to connect the “AVI, 2,3 or 4” input Terminals
Connect VCRs end other peripherel equipment
(VHS VCR)
0
•000ooo
L
CD
fli
Audio VidDc
f, OUT L OUT
0
©
52
♦ ♦ ♦
(Super-VHS VCR)
Notes:
• When an S-Video cable is connected to the S-Video terminal, the corresponding Video input will be switched off and the signal
from the S-Video input will be used.
• When a Monaural VCR is used, connect the Monaural Audio cable to the Audio T" (Left) terminal.
• Select the desired AV input position by pressing the TV/AV button. (Refer to page 10)
• Input 3 is located on the front of the unit.
• The AV2 and AV4 audio input terminals serve a$ the audio input terminal for both the Video input and the DVD input.
8