Cleveland Range inverter User Manual
Page 39
Chapter 3 - Parameter List
33
Code
Description
Keypad
Display
Setting Range
Units
Factory
Default
Adj.
During
Run
Page
2 (Stop)
I/O-49
Waiting Time after Loss of Freq.
Reference
I 49
0.1 to 120.0 [sec]
0.1
1.0 [sec]
Yes
0 (CMC- Bus ASCII)
I/O-50 Communication Protocol Selection
I 50
7 (Modbus-RTU)
-
7 (Modbus-
RTU)
Yes 73
I/O-99 Return Code
rt
-
1
Yes
73
Note: Parameters that are set by a bit are ON (1) when the upper LED is lit as shown below.
(F59, H19, H22, I15, I16, I45 are the parameters that are set by bit.)
Example) when the keypad displays ‘00000011’
Note: FU1-20, FU1-21, FU1-25, FU1-36, FU2-54, FU2-83, I/O-05 and I/O-10 are set at 50Hz for Standard (EU)
types and 60Hz for US types. Please check these parameters before commissioning to veryfiy that you have
the right product.
Bit 0
Bit 7
1:ON
1:OFF