Delay reverb — d r, Delay reverb, Mixer – Yamaha FX550 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 4: Effect parameters
Delay Reverb — D R
This effect uses delay and reverb effects in series. The signal is first fed to the delay, then to the
reverb.
DLYL
Left Channel
Delay Time
0.1 ~ 750 msec
DLYR
Right Channel
Delay Time
0.1 ~ 750 msec
FB
Feedback Level
0 - 1 0 0 %
The amount of effected signal that is fed
back into the effect.
UR
L/R Balance
L50 - L=R - R50
If the DLYL and DLYR parameters are set to
the same (or similar) delay times, this effect
may sound like a signal phasing problem. If
so, adjust the L/R parameter to correct it.
RVT
Reverb Time
0.3 - 40 sec
Reverb length.
WID
Sound Image Width
0 - 1 0
HF
High Frequency
Ratio
1 - 10
D/R
Delay/Reverb
Balance
D50 - D=R - R50
MIX
Mixing Balance
0 - 1 0 0 %
0 = dry signal.
50 = 50% delay -> reverb 50% dry signal.
100 = 100% delay ^ reverb.
LVL
Output Level
- oo. -30 dB - +6 dB
Sets the output level of the effect.
Typ
Filter Type
HPF, LPF
Frq
Cut Off Frequency
HPFTHRU,
32 Hz - 1.0 kHz
LPF: 1.0 kHz - 16 kHz,
THRU
INPUT L O-
INPUTRO-
DELAY
REVERB
R
L
MIXER
-O OUTPUTL
-O OUTPUTR
D R Block Diagram
26