Connect all leads, Installation guide, Continued – Panasonic CQ3700EU User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation Guide

continued

A handy way to identify the speaker leads and the

speaker they connect with is to test the leads using
a 1.5 volt AA battery as follows.

Hold one lead against one pole of the battery and

stroke the other lead across the other pole. You will
hear a scraping sound in a speaker if you are hold­
ing a speaker lead.

If not, keep testing different lead combinations until

you have located all the speaker leads. When you

label them, include the speaker location for each.

Antenna

The antenna lead is a thick, black wire with a metal
plug at the end.

◦ Connect All Leads

Now that you have identified all the wires in the

vehicle, you're ready to begin connecting them to
the stereo unit wires. The connection diagram on

Page 21, 22 shows the proper connections and

color coding of the leads.
We strongly recommend that you test the unit

before making a final installation.

You can set the unit on the floor and make tempo­

rary connections to test the unit. Use electrical tape

to cover alt exposed wires.

IMPORTANT ; Connect the red power lead last,

after you have made and insulated all other connec­
tions.

Ground
Connect the black ground lead of the power con­

nector to the metal vehicle chassis.

Speakers

Connect the speaker wires. See the wiring diagram
below for the proper hookups. Follow the diagram

carefully to avoid damaging the speakers and the

stereo unit.

The speaker used must be able to handle more
than 35 watts of audio power If using an optional

audio power, the speakers should be able to handle

the maximum amplifier output power. Speakers
with low input ratings can be damaged.

Speaker impedance should measure 4 - 8 ohms,

which is typically marked on most speakers. Lower
or higher impedance speakers will affect output and

can cause both speaker and stereo unit damage.

CAUTION : Never ground the speaker cords. For

example, do not use a chassis ground system or a
three-wire speaker common system. Each speaker

must be connected separately using parallel insulat­
ed wires. If in doubt about how your vehicle’s

speakers are wired, please consult with your near­

est professional installer.

CORRECT

No Common Ground

INCORRECT

Common Chassis Ground

INCORRECT

Speaker Common

(common earth lead)

L *

LkJ

R *

—or

16

CQ-3700EU

Advertising