Power and sound controls, Power, Volume – Panasonic CQ3700EU User Manual
Page 5: S*hdb (super high definition bass), Attenuator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power and Sound Controls
Power
If the vehicle is not already running, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power.
Volume
• Press “VOL A ” or “VOL V" to increase or decrease volume.
U U L
3D-
■ Volume Level
Oto 40
• Press “VOLA” or “VOLV” for more than a half second to change
numeric levels on the display rapidly.
S*HDB (Super High Definition Bass)
Especially for rock music, the bass-sound will be more powerful.
• Press and hold ATT (S»HDB) for more than 2 seconds to be able to
listen to high-definition bass.
©tSE©
• Press and hold ATT (S*HDB) for more than 2 seconds to return to the
normal tone.
Attenuator
• Press ATT Volume will decrease to about 1/10 of its previous level.
/?in7
• Press AT
t
! again to deactivate when listening at normal volume.
Note: This unit is equipped with anti-volume-blast circuit which serves as an automatic volume level
adjuster so that you will not be deafened with sudden loud volume.
This system operates as below. When PWR is first pressed to switch on, the volume level is low. After
that, the volume level gradually returns to the level when the switch is turned off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 on the display.
CQ-3700EU