Power and sound controls continued, Changing audio modes, Bass and treble – Panasonic CQ3700EU User Manual

Page 6: Balance, Fader, Selecting auxiliary source, Power and sound controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Power and Sound Controls

continued

Changing Audio Modes

Press SEL to switch the audio mode in the following order.

VOLUME

^

BASS

TREBLE

t

FADER

^

BALANCE

Bass and Treble

Press SEL to select the BASS (TREBLE) mode. Press “VOL A" or “VOL

V" to increase or decrease the bass/treble response.

-3

-12 to 12

-12 to 12

Balance

Press SEL to select the BALANCE mode. Press “VOLA” or “VOLV” to

shift the sound volume to the right or left speakers.

BHl

P (5

BRi

1 to 15

Balance Center

Fader

Press SEL to select the FADER mode. Press “VOLA" or “VOLV" to

shift the sound volume to the front or rear speakers.

or R

1 to 15

Fader Center

CAUTION:
When changing sound volume level for the rear side speakers by

using FADER button of the wired remote control unit (CA-
RC3000EU), it may occur that a sudden change in volume from the

front side speakers. So, pay attention when you adjust the volume.

Note;

When a control mode (BASS/TRE/BALVFADE) is selected but no operation is made within 5 seconds (2
seconds at volume mode), the display will return to the normal operation (Radio, Tape) mode. In such a
case, press SEL again to select the next control mode.

Selecting Auxiliary Source

(D Press and hold MODE (AUX) for more than 2 seconds to select AUX

Input mode.

P J M v

u ^

©Connect the auxiliary equipment (any other appropriate equipment)

to the AUX IN Connector.

[Canceiing AUX Input mod^

Press MODE (AUX) to resume the previous mode.

CQ-3700EU

Advertising