Using pc cards, Add-ons/peripherals, Type i or ii – Panasonic CF-M32 Series User Manual
Page 46: Type iii
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Add-ons/Peripherals
Using PC Cards
Your computer has two PC Card slots.
These slots conform to the PC Card
Standard; therefore, communications
and SCSI devices may be utilized. The
slot allows you to use two Type I or
Type II cards (or one Type I and one
Type II), or one Type III card.
►Type I or II
Two cards can be used simultaneously.
PC Card Slots
►Type III
One card can be used only in the
( mMto«!))
• Please check the PC Cards’ specifications. Be sure the total operating cur
rent does not exceed the specified limit. Damage may result otherwise.
Allowable Current (total for two slots): 3.3 V: 800 mA, 5 V; 600 mA
• PC Cards which require a 12 V power supply cannot be used.
• There are times when both a Type I card and a Type II card will not work at
the same time.
• Using ZV Port Compatible PC Cards
• Some ZV port compatible PC Card driver software may not be compat
ible with this PC Card controller of this computer. Check with your
Panasonic dealer when making your purchase. See the manual included
with the PC Card for information on how to operate the ZV port compat
ible PC Card.
• Some PC Cards may not work if installed in slot 2.
• Using CardBus compatible PC cards
• When using a CardBus type card, no other types of cards can be used,
• When removing a CardBus type card (e.g., to insert a non-CardBus type
card), be sure to restart the computer after pressing (STOP] (Q* next
page "To remove a PC Card").
After that, follow the procedure on installing/removing a PC card.
46