Installing/removing the pc card, 2 9 removing the pc card (or the dummy card), 9 installing the pc card (or the dummy card) – Panasonic CF-M32 Series User Manual
Page 47: 3 turn your computer on
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing/Removing the PC Card
To remove a PC Card
Before removing a PC Card, go to [Socket Status) (in (Start] - [Settings] -
[Control Panel] - (PC Card (PCMCIA)]), select the PC Card slot and press
[Stop], When removing a CardBus type card, be sure to restart the computer.
1
Power off your computer (o-page 18)
Do not shut down using the suspend or hibernation mode.
. (©SQPvIM)}
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
2
9 Removing the PC Card
(or the dummy card)
0 Pull the button out and then press it.
Pull the PC Card the rest of the way out.
X
note
)-
Dummy cards are provided at the time of
purchase. They provide protection for the
PC Card slots against such things as dust.
9 Installing the PC Card
(or the dummy card)
0 Simply slide the PC Card in until it snaps into 0
place.
(1) Pull the button out and return it to the original
position.
Please refer to the manual for each card on
how to install the card (insertion is typically
label-side up).
3
Turn your computer on
There are some PC Cards that require a special or updated device driver be in
stalled. Follow the instructions on the screen and read any related manuals on
how to install device drivers.
47