About the supplied application software, Using mpeg1 coder (mpeg1 compression software), Note – Panasonic LF-D102U User Manual

Page 26: Video capture card, Sound cards, Mode, Operating requirements for mpeg1 coder

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

About the Supplied Application Software

Using MPEG1 Coder (MPEG1 compression software)

MPEG1 Coder

This software allows you to compress, in real time, full-motion video shot with a video camera and other data

into the MPEG1 format, and record it to a DVD-RAM disc or PD cartridge.

With a single 2.6 GB DVD-RAM disc, you can record approximately 2 hours of MPEG1 video in standard mode

(with a video data rate of 2.0 Mbps and an image size of 320

x

240).

It can also play video recorded in the Windows standard Active Movie (software decoder) format.

Note;

• A sample MPEG1 file is stored in the “Sample" folder in the root directory of supplied CD-ROM disc.

This sample data can be used with MPEG1 Coder.

Operating requirements for MPEG1 Coder

Computer:

OS:
CPU:
Memory:

Hard disk space;

Others:

IBM PC/AT compatible computer

Windows 95, Windows 98

Intel Pentium 166 MHz or higher (MMX capabilities recommended)

32 MB or higher (64 MB recommended)

3 MB (minimum)

An environment with a video capture card and sound card

Video capture card

A video capture card (not included) is required to capture video with MPEG1 Coder.

Below are the two compatibility requirements for video capture cards.

1. Compatible with Video for Windows Verl.1 or higher
2. Support of the RGB capture data format

Verified compatible video capture cards:

1. Panasonic EggCam™ Camera Kit GP-KR0011

Sound cards

A Sound Blaster-compatible sound card (not included) is required to record sound.

Verified compatible sound cards

1. Sound Blaster 16 PNP

2. Sound Blaster AWE 32

3. Sound Blaster AWE 64

4. Sound Blaster PCI 64

5. XGYMF-724V 3D Chip PCI

Note:

• Because MPEG1 Coder uses software to compress image data, some computers may not have

sufficient performance for data compression (e.g., software processing may take a long time).

Example performance

Standard mode

Panasonic EggCam^^^ Camera Kit GP-KR0011

Pentium II 266 MHz (Memory: 64 MB)
size 320 X 240, capture format RGB15, video rate 3 Mbps,

audio rate 96 kbps, audio 11 kHz, mono

With the above conditions, a capture rate of roughly 30 frames per second is possible.

Mode:

Capture card:

CPU:

Capture settings:

J

26

Advertising