Panasonic DMR-T3040 - Manual (Page 10)

0)t3
с о
lë
с о « >
g
■
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
{These can damage the unit.)
■ How to hold a disc
Do not touch the recorded surface.
If there is dirt or condensation on the disc
Moisture may condense on discs after they are brought inside
from the cold.
DVD-RAM and DVD-R
Clean only with the DVD-RAM/PD disc cleaner available as an
optional accessory, part number LF-K200DCA1.
Do not use cleaners or cloths for CDs to clean DVD-RAM and
DVD-R.
DVD-Video, CD, Video CD
\A/ipe with a damp cloth and then wipe dry.
■ Handling precautions
• Do not write on the label side with a ball-point pen or other writ­
ing instrument.
• Do not use record cleaning sprays, benzine, thinner, static elec­
tricity prevention liquids or any other solvent.
• Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available on the mar­
ket.
• Do not use discs that are badly warped or cracked.
■ Do not place or store discs in the following
places
• Locations exposed to direct sunlight
• Humid or dusty locations
• Locations directly exposed to a heat vent or heating appliance
STEP
1
The remote control
Batteries
• Insert so the poles (+ and -) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which,can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
ива
If you cannot operate the unit or television using the remote con­
trol after changing the batteries, please re-enter the codes
(television->page 17, main unit ->page 64).
Remote control signal sensor
Aim at the sensor avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.