Panasonic DMR-T3040 - Manual (Page 17)

STEP 6
Television operation
TV/VIDEO
Numbered
buttons
Ò, POWER TV
DVD, TV
A V
, CH
+ -, VOLUME
You can control televisions by entering the remote control code.
1
Refer to the chart right for the code
for your television.
2
Press and hold [ct), POWER TV] and
enter the two-digit code with the
numbered buttons.
• e,g„ 01, press [0] [1].
• Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows
correct operation.
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is rot compatible with your television,
• This remote control works with most recently manufactured
televisions, but may not be able to control older models.
Code No. Manufacturer
01 Panasonic/National QUASAR
02 Panasonic/National QUASAR
03 MAGNAVOX SYLVANIA PHILIPS (RC-5)
04 ZENITH
05 THOMSON RCA GE
06 SHARP
07 SHARP
08 SONY
09 TOSHIBA
10 SANYO FISHER
11 JVC
12 HITACHI
13 MITSUBISHI
14 SAMSUNG
15 GOLDSTAR/LG
16 GOLDSTAR/LG
17 GOLDSTAR/LG
18 SAMSUNG
19 SAMSUNG
■ Operation
Point the remote control at the television.
Operation Button
On and off [Cl>, POWER TV]
Video input mode [TVA/IDEO]
Channels
(Switch [DVD, TV] to‘TV".)
[ a V , CH]
or
Numbered buttons
e.g.,
Channel “5”: [0] [5]
Volume [+ VOLUME]
I
è
t:
(U
CO
:RQT6637