Panasonic DMR-T3040 - Manual (Page 44)

Creating play lists
I
§
ENTER
® 'W)
wfltte.Tvveeo («1COI
o o o ©
,0 @ <D
'0 0 0
;0 0 ©
0 0 © m
f-cwca I
(J0 0 □
___________ _ p-<UX«A«tW
o
QffinFwriùer
i©.
/ TOP /
itirrré^
o
FltCIiCFfi
i
t
Or
o-
Rm«M
prasofCK OMtr DtSPv^v THC&f
;o o o o
К3 Й
opaciDst SttTijs
m o
SgT UP lÉIJOtO jTvlgÆ!'"JgT
1 11 I
CD CD
ËBASg ouaflwQ mraaoi litfogB
CD CD CD CD
PLAY LIST
RETURN
irmirfTTi
Specify start and end points to create scenes, then specify the order
in which they are to be played. These scenes are not recorded sep­
arately so this doesn’t use much capacity.
You can create a maximum of 99 play lists and 999 scenes on a
DVD-RAM and HDD.
1 While stopped
Press [PLAY LIST].
2 Press [A, T] to select
press [ENTER],
and
PLAV UST
Ht, t»Ti .T0T«i aw___ÏÏIIE _
j II t nS) llin I ISEf WitgaaiDcC
n BZI l:S1SK'Dtnouut_
□CZMZDC3!:
nDCiiatzit
□>
3 Press [ENTER] at the start point.
HDD: The location of the
whole program's start point
DVD-RAM: The location of
the whole disc’s start point
4 Press [ENTER] at the end point.
To specify another scene
Select “Next” and press [ENTER], then repeat steps 3 and 4,
5 Press [A, T] to select “Exit” and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [RETURN].
To stop partway through
Press [RETURN].
For your reference
• You cannot create or edit play lists if the disc is protected.
• You cannot specify an end point before a start point, or a start
point after an end point.
• You may not be able to specify points within 3 seconds of each
other.
• Use search and slow-motion to find the start and end points.
• Play pauses if the end of the last program on the disc is reached
during this procedure.
• Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.
• Pressing [^44], [►►I] in step 3 and 4 allows you to select pro­
grams in the same drive.
RQT6637