Step 4 vcr plus+ guide channel, Return, Settings (t?l – Panasonic DMR-T3040 User Manual
Page 14: To return to the previous screen, When you are finished, Step 4 vcr plus+ guide channel settings, Step, A, t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
о
О)
STEP
4
VCR Plus+ guide channel
RETURN
Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart show
ing the channels, station names, and guide channels.
e.g..
Station
name
Guide
channel
Channel
number
CBS
04
04
-►o
HBO
33
15
-»0
Nickelodeon
38
20
-»©
Look up the guide channels Write down all the stations you
for the stations in magazines, can receive.
Q The guide channel and channel numbers correspond so you do
not have to change the setting.
Ф In step 5, enter channel 15 next to Guide Channel 33.
0 In step 5. enter channel 20 next to Guide Channel 38.
1
Press [SET UP] to show the menus.
2
Press
[A, T]
to select “Channel” and
press [►].
settings (t?l
3
Press
[A, T]
to select “VCR Plus+
CH Setting” and press [ENTER].
e.g., when the current antenna system is CATV.
Press
[A, T]
to select the guide
channel you want to set and press
[►]■
When selecting the guide channel, press and hold [ A , T ] to
scroll the screen up and down.
Press
[A, T]
to select the channel
corresponding to the guide channel
and press
[ < ] .
223? Ci
4
5
1 6 1
1Ж1Ш
ММЦЙ
7
8
To delete a number, press [CANCEL].
Repeat steps 4 and 5 as necessary.
Press [ENTER].
The “Channel” screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
VCR Plus4- and PlusCode are registered trademarks of Gem-
star Development Corporation. The VCR Plus-l- system is manu
factured under license from Gemstar Development Corporation,
Pats.
5,307,173;
5,335,079;
4,908,713;
4,751,578;
and
4,706,121
HQT6637>