Time stamp feature, Display main menu, Display set up vcr screen – Panasonic PV C2020 User Manual
Page 32: Select timestamp, Return to normal screen, Time stamp example, I^^check list before you begin, Special vcr features (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special VCR Features (continued)
Time Stamp Feature
This unit writes program data (see example below) for about the first 10
seconds of every recording.
The information is then displayed the first 10 seconds of playback. To
change the data, see “Changing Time Stamp Data" section on next page.
1
Display MAIN MENU.
Press ACTION.
2
Display SET UP VCR
screen.
1) Press AT^ ►
to select
“VCR.”
2) Press ACTION
to display.
3
SET UP VCR
REPEAT PLAY
TIMER PROGRAMMING
TIME STAMP
REMOTE WARNING
OFF
SELECT
SET
END
A ▼ KEY
► KEY
ACTION KEY
Select TIMESTAMP.
1) Press
AT
to
select.
2) Press ► to set
“ON” or “OFF."
• When “OFF" is selected, the
program data is written on the
tape, but will not be displayed.
4
O
Return to normal
screen.
Press ACTION twice.
<Time Stamp Example >
Norma)/ One
Touch Recording
12/28/1999 TUE
12:00PM
CH 08 ABC
Timer
Recording
12/27/1999 MON
12:00PM -
1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE
I^^Check list before you begin.
□ The clock is set to correct time,
□ The record tab is in place.
2
SET
• S E L E C T
3
U P
CH DOWN
VOL UP
VOL DOWN
1
PROG
2
4
32
For assistance, call 1 -800-211 -PANA(7262)