Panasonic PV C2020 - Manual (Page 42)

On-Screen Display (OSD)
VCR Status & Clock Display
DISPLAY
o
To display or remove the
overlay.
Press DISPLAY.
Function Status Channel Caption
Current Time
Rec Time Remaining
(OTR mode only, —
see page 13.)
REC
0:25
12:00PM ABC
-0:12:34-
SPv
12/27/1999 MON
12:00PM-
1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE
Counter
‘Tape Speed
Time Stamp Data (See pages 32, 33.)
Blue Screen Display
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with the “Weak Signal Display
ON/OFF” (see page 34) set to “OFF,’
the TV screen will turn solid blue.
Channel & Function Display
When a function button is pressed
(PLAY, FF, etc.) or you change
channels, the unit mode or channel
number will be displayed. (Some station
names may also appear if Channel
Caption is set. See pages 30, 31.)
Warning and Instruction Displays These displays will alert you of a missed
operation or provide turther instructions.
OSD Caution Page
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
• If no active channels are found for CHANNEL MEMORY...
7
PLEASE SET CLOCK BEFORE
PROGRAMMING • If you attempt to set or review a Timer Recording, VCR Plus+
System Programming or set the On-Timer and the Clock is not set...
8, 9, 41
CHECK CASSETTE RECORD TAB • If you press REC, and a cassette is inserted with no record tab,.. 6, 13
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC • If you press STOP during a Timer Recording...
15
NO CASSETTE
PLEASE INSERT A CASSETTE • If you press PLAY, FF, REW, or REC without a cassette
inserted...
12, 13
PLEASE PREPARE FOR TIMER REC • If the unit is not in Stop mode or a cassette with record tab is not
inserted two minutes before a Timer Recording is about to begin...
14, 15
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
• If head cleaning becomes necessary while playing back a
tape...
43
VCR LOCK ACTIVATED • If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode... 34
42
For assistance, call 1-800-211-PANA(7262)