Secure the rear of the unit, Using the rear support strap d), Using the rubber cushion (option) – Panasonic CQ-R145U User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt © using a suitable wrench.
c) Insert the Power Connector ® to the unit.
d) Insert the unit into Mounting Collar (j) and push it in until “click" is heard.
I
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
• Using the Rear Support Strap d)
Affix one end of the Rear Support Strap (3) to the rear of the unit, and the other end to the Fire Wall
of Car, or some other metallic area.
• Using the Rubber Cushion (Option)
{If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt on the rear of the unit with Rubber Cushion (Option), and mount it into the
existing Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
(existing on the car)
3. After installation, reconnect the negative (-) battery terminal.
CQ-R145U
21