How to connect the component video input terminals, How to connect the av prog. out terminals, Installation – Panasonic CT-30WX50 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
How to connect the COMPONENT VIDEO Input Terminals
DVD Player
Ajdkh
OUT
OVD
î
Y^^P
kî
OLTT
Pn Pe Y
How to connect the AV Prog. Out Terminals________________
The “Prog. Out” Terminals output the same signals as main picture on the TV screen and sound from the speaker at that
time, e.g. TV programs or signals from INPUT
1
,
2
, 3, 4 terminals.
Recording Equipment
(VHS VCR)
(
1
) Never connect the VIDEO IN and Prog. OUT terminals to the same video recorder, as this could cause incorrect
operation.
(2) The monitor output emits the main picture normal video and audio signals.
(3) Even if the television is in picture-out-picture condition, Prog. OUT terminals output the same signals as main picture on
the screen and sound from speaker. Sub picture including strobe, still, channel search, etc. will not be output at the
PROG. OUT terminals.
(4) DVD signal (Y, P
b
, P
r
) is not output at the Prog. OUT terminals.
(5) COMPONENT VIDEO INPUT
In order to prevent colors from interfering, image signals are divided into three signals of brightness, red and blue
(green is created automatically from these three signals). Each signal is processed from its own circuit and combined
on the screen, creating a natural picture.
_