Panasonic CT-30WX50 - Manual (Page 60)

Operating peripheral equipment using the remote control
2 Setting to the remote using the step and set method
(When the code is not known)
1
P r e s s a n d h o l d t h e P O W E R a n d
ACTION keys simultaneously for three
full seconds
After 3 seconds, all the illuminated mode
keys will begin to flash
Release the POWER and ACTION key
va ( (<J ( ACTION j C>l I ''O'-
Press the mode key
The mode key will illuminate steadily,
all others will go out
Press VOL “ ► “ key to step to the next
code
Press POWER to send a test signal in
that format
Continue doing this until the proper
device code is found, and the target
device responds
Once the code has been found, press
the ACTION key to lock it in
Notes.
• The step and set mode will start from the current device (not the beginning of the list,
except for the first time)
• The step and set mode works in the reverse direction using the VOL “ ◄ ” key
Infrared Remote Codes for Specific Components
Helpful Hint Write down the code numbers for your components in the space provided below This will serve as a
handy reference whenever you need to reprogram your remote control
CABLE
Cable Box
VCR
Video Cassette Recorder
CD
Compact
D isc
Player
LD
Laser Disc Player
DBS
Digital Broadcast System
RCVR
Receiver or Amplifier
other Component Other Component other Component
Other Component Other Component Other Component
60