Panasonic CT-30WX50 - Manual (Page 59)

Programming The Illuminated Remote Control Using Access Codes
The remote control can be preset for other manufacturers, by utilizing the REMOTE MODE SELECTION BUTTONS for
CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD, CD, LD) ,DBS and AUX (for Cassette Player or a
VCR2)
(Details on remote control buttons to operate peripheral equipment — See page 61 to 63 and 64 to 66)
1 Setting up the remote using the numerical keys (When the code is known)
1
vol (
Press and hold the POWER and ACTION keys simultaneously for three full
seconds
After 3 seconds, all the illuminated mode keys will begin to flash
Release the POWER and ACTION keys
o ®
© ® ®
© ® ®
Press the desired mode key
The mode key will illuminate steadily, all others will go out
Enter the three digit set up code, by using the Remote Control Keyboard
If the correct code is entered, the mode key will blink twice and then go out
Now your remote is set for this code
Note:
If an incorrect number is entered (or there is an incomplete entry after 30 seconds), the key illumination goes out
(no blink) and the settings are unchanged
Device Operate Default
TV TV (Only Panasonic ) Panasonic Code
VCR VCR ( Preset) Panasonic Code
CBL Cable Boxes ( Preset) Panasonic Code
DBS DBS Boxes ( Preset) Panasonic Code
RCVR RCVR ( Preset) Technics Code
AUX Cassette Players, VCR2 ( Preset) Technics Cassette Players Code
DVD DVD & LD & CD Player ( Preset) Panasonic DVD Code
DTV STB i Only Panasonic ) Panasonic Code
59