Panasonic SC-CH31 - Manual (Page 16)

(Alto available from the remote control. Follow the procedure
deacribed below.)
Basic Operating Procedure
3
4
Press POWER STANDBY Cl)/ON to switch on
the power.
Select the sound source by pressing TAPE,
CD or TUNER.
The display of the selected mode will appear. If you press a
different sound source while listening to a compact disc or
tape, the disc or tape automatically stops playing.
eWhen selecting the tape mode from the remote control,
press on TAPE instead.
The deck will automatically start playing.
Start the sound source.
Adjust the volunra level.
The memory backup function will retain the volume level and
sound source.
How to use headphones (not Included)
Reduce the VOLUME level.
Connect the headphones to the headphones jack.
•When you connect the headphones, the speakers will automati­
cally cut off.
•Avoid listening for prolonged periods of time to prevent hearing
damage.
• Plug type: Stereo mini
How to use a microphone (not included)
Note;
Before you set the system to the standby mode, be sure to reduce
the volume level to prevent the extremely high output from the
amplifier from damaging the speakers.
How to mute the volume
(For areas except for Australia and New Zealand only:)
Reduce the VOLUME level.
Connect the microphone to the MIC Jack.
•You can control microphone volume using the MIC VOL control
within the volume levels of the main unit. Make sure to adjust the
main volume level using the VOLUME control to optimum posi­
tion.
•If you hear strange noises (squealing or howling) during mixing,
change the direction of the mioophone or turn down the volume.
•For more detailed instructions, see "Using the Microphone" on'
page 53.
Press the MUTING on the remote control.
The muting indicator appears on the display.
•This lowers the volume level by 20 dB (approximately Vio).
•Cancel the muted state by pressing the muting button once again
or reduce the volume level to the minimum position and then reset
to the desired volume.