Panasonic SC-CH31 - Manual (Page 36)

Making a Recording
■ To briefly interrupt recording
(Also availaMe from the remote control.)
Press REC PAUSE.
REC PAUSE
(ZZZ3
The cassette deck will go into the pause mode.
To resume recording, press the play button corresponding to the
direction in which recording is taking place.
■ To stop recording
(Also available from the remote control.)
Press the cassette deck stop button.
■ To erase a recorded tape (Deck 2)
When you make a new recording on a previously recorded tape, the
new recording wilt automatically erase what was previously re-
corded. To erase a tape without making a new recording, follow the
steps below.
(Steps 4) and 5) also available from the remote control.)
1) Press the TAPE input select button on the amplifier.
2) Insert the recorded tape Into the ceeeatte holder of deck 2.
3) Select the desired reverse mode.
4) Press REC PAUSE.
5) Press the playback button corresponding to the side to be
ereeed.
(continued)
■ To use the boat proof function
Press FM MODE/BP on the tuner.
FM MODE/BP
I :>
When recording an LW/MW (For areas except Australia and New
Zealand, MW/SW1/SW2) broadcast, use the beat proof button to
reduce unwanted “beat” signals (whistie). Press the FM mode/ beat
proof button to whichever position [BP 1, BP 2 or BP 3 (For areas
except for Australia and New Zealand, BP 1 or BP 2)] best reduces
these beat signals. The display will indicate which position is in
effect.
:
b p
I
VOLUME
sp p
ITIWW
MN
•■i
VOLUME
(For Australia and New Zealand only:)
IP 3
¿ d ' b ™ 'M
VOLUME