Panasonic SC-CH31 - Manual (Page 47)

15 13 12*14
12 Press VOL PRESET to set the volume level
for timer play.
The volume level display will flash.
.. U n .J Tt
y U U j 3
Q D C D C E Q D C E I C E C D t l J U i a J D t l B f l B ^
Above display shows the timer play setting on the CO
player.
13 Adjust the volume level using the volume
level control.
*■
h u cJ
(DCDCDCEtl}[Z)[riCI]CEI[]]D[n)(!I]^
14 Press VOL PRESET again.
The volume level display will stop flashing and the display
will change to the previous display.
•This presets the volume level into memory.
15 Press one of the input select buttons.
For timer play on the CD player;
Press the CD input select button.
You can use timer play for sequential play or program play.
For program piay, specify the desired tracks.
For timer play on the tuner:
Press the TUNER input select button, select the desired
band, and tune in a station.
For timer play on the tape;
Press the TAPE input select button.
You can operate both decks 1 and 2 by the timer. When you
load cassettes in both deck 1 and deck 2, deck 1 has priority
and plays first.
16 Press PLAY TIMER.
The system is switched to power standby mode.
1:5'n n
( (--u u»
illuminates
The timer indicator will appear on the display.
Play will start at the set time.
To liaten to the system after you have set the timer but befors
timer play has taken place:
Press the power switch to on and select the desired source. After
you have finished listening, return the system to the timer setting
mode. (This switches the power to the standby nwde.) Even it you
change the volume level after presetting the volume level for the
timer play, the timer play will start with the preset volume level.
Notes:
•If the power is on, the timer will not function. The system must be
in the standby mode.
•If you are using the timer to play a compact disc, do not open the
disc holder if you have already programmed tracks. This will
cancel the program and play will start from the first track.
47