Panasonic SC-AK25 - Manual (Page 19)

tfsfening to topes
To fast-forward or rewind the tape
Press K</« or in the stop mode.
Tape direction To rewind To fast-forward
i«/«
To find the beginning of a program
(TPS: Tape Program Sensor)
Press i-^/« or »/»i during play.
Tape
direction
To play the current tune
from the beginning
To play the next tune
from the beginning
i«/«
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may
not function properly in the following cases
«With short silent parts
•When noise occurs between tunes
•With silent parts found within tunes
I
V»
J
4 m s
V
%■
M
I
About the Dolby noise-reduction system
Except SC-AK25 mbdet-tor A ustf a I ia a nd NewZea land
The Dolby noise-reduction system is designed to effectively reduce
the annoying high-frequency “hissing" noise typical of cassette
tapes.
During recording, the system functions to increase the high-frequen­
cy sound level, and then, during playback, that same portion is
weakened to bring it back to the previous level.
The Dolby NR effect is obtained by selecting the same type of Dolby
during playback as was used during recording.
This unit includes the Dolby 3 NR-type.
Dolby B NR-type
Noise is reduced to about one-third.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol □□ are trademarks of
Dolby Laboratories Licensing Corporation.