Panasonic SC-AK25 - Manual (Page 26)

Varying the spund quality with
the acoustic image (Al) equalizer
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT
sound quality coordinates to achieve subtle sound quality settings
with ease.
Press SOUND EQ joystick to turn on the
equalizer.
The SOUND EQ lamp lights more brightly, and “FLAT” is
cleared.
^ Dial SOUND EQ to display “At EQ.”
When it is turned clockwise, the settings are selected in the fol­
lowing sequence.
(T) HEAVY
eg) CLEAR
@ SOFT
@ DISCO
@ LIVE
© HALL
® MANUAL
® Al EQ
Operate SOUND EQ joystick and set the
sound quality as desired.
0 <-------> direction: SOFT-SHARP setting
( 2 ) I "f direction: LiGHT-HEAVY setting
Repeat steps © and @ to set the desired sound quality.
The original display is restored on the display panel in about
5 seconds. Only one Al EQ lamp lights to give a rough indica­
tion of the coordinate position.
The sound quality can be re-selected using SOUND EQ while
the lamp is lighted.
To release the equalizer
Press SOUND EQ joystick so that “FLAT’ Is displayed.
m
•The sound quality setting is stored automatically. It is recalled
when “Al EQ” is next selected.
•All recordings are performed at the flat setting even if an alterna­
tive sound quality setting has been selected.