Baking bread, Place the ingredients in the bread pan, Set the kneading blade – Panasonic SD256WTS User Manual
Page 14: Place the measured ingredients, Plug the breadmaker
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Baking bread
Place the ingredients in the bread pan
1
Remove the bread pan and
set the kneading blade
© Twist the bread pan
round.
(
2
) Remove the pan.
Place the measured ingredients
in the bread pan
© Place the dry yeast at the bottom
(so that it does not touch the
liquid later).
@ Place the kneading
blade firmly into the
shaft.
Check around the shaft and inside
the kneading blade and ensure
that they are dean. (P.26)
• When baking rye bread, use the
specified kneading blade.
(SD-257only)
• The blade fits loosely into place, but it must touch the
bottom of the bread pan.
Baking bread with added ingredients
(P. 17)
(SD-257 only)
, Clean and dry
beforehand
@
Cover the yeast with all the dry
ingredients, (flour, sugar, salt, etc.)
• Flour must be weighed on scales.
(3) Pour In the water and any other
liquids.
0 Wipe off any moisture and flour
from the outside of the pan.
0 Place the pan inside the bread
bakery by turning it slightly from
left to right. Fold the handle down.
©Close the lid.
• Don’t open the lid until bread is
complete (affects bread quality).
© Open the dispenser lid.
© Place the ingredients.
@ Close the lid.
Plug the breadmaker
into a 230 V socket
14