Dial [sound eq] to display ‘‘manual – Panasonic SC-AK27 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Varying the sound quality v^ith the
manual equalizer __________
Dial [SOUND EQ] to display ‘‘MANUAL”.
When it is turned clockwise, the settings are selected in the
following sequence.
® H E A V Y -
(2) CLEAR
CD
SOFT
(D DISCO
® LIVE
® HALL
® MANUAL
® Ai EQ
® FUT -
The SOUND EQ lamp lights more brightiy, and “FLAT" is deared.
Operate [SOUND EQ] jogcap and set the sound
quality as desired.
(j) <------- > direction:
For selecting the range of the sound to
be adjusted
Characteristics of each sound range
Under 100 Hz:
Around 330 Hz:
Around 1 kHz:
Around 3.3 kHz:
Above 10 kHz:
i
T
direction:
Super woofer range
Bass to midrange
Midrange
Midrange to trebie
Trebie
For adjusting the ievel (7 steps)
When the level is in the center, the dot fiashes rapidiy.
Repeat steps © and ® to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
* •
To release the equalizer
Dial [SOUND EQ] to display “FLAT”.
• The sound quality setting is stored automatically. It is recalled
when “MANUAL” is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
C
B
1
2
q>
te
■O
c
3
0
1
"B
3
cr
"0
§