Press power, Press menu, Press volume to set the desired volume level – Panasonic SC-CH150 User Manual
Page 20: Hbd 1, To stop playback at any time, For your reference, Z3§g, H b d 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Normal, chrome and metal tapes can be used.
£Z3§g
L........... I
6
4
Press POWER.
When the easy operation buttons shows
same as at step 8, you can skip steps 2
and 3.
Press MENU.
D O L B Y N R
«
Press DOLBY NR to set the
Dolby NR system on or off.
Lights.
This should be off when the recording
has not been made using the Dolby NR
system.
D I R E C T I O N
%
8
Q
Press DIRECTION to select the
tape travel direction.
►: Tape play starts with the forward
side of the tape.
Tape play starts with the reverse
side of the tape.
ICBLiVSHftl O
VOLUME
►
mn
V'"? .
Tape direction display
To start play from the reverse side, take
up the tape onto the other reel before
playback.
Press PLAY.
Play Is repeated until ■ is pressed.
o
Press VOLUME to set the
desired volume level.
”
H B d 1
To stop playback at any time:
^ Press ■.
For your reference:
When tape play Is switched midway through to the radio or CD play,
tape play will stop automatically.
20