Remote control unites operation range, How to use the remote control unit properiy – Panasonic SC-CH150 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing the lithium battery

Remote control unites operation range

While pressing the cover

in the ® direction, pull

it out in the @ direction.

Reverse side of
remote control unit

Remote control signal sensor

To prevent damage to the lithium battery and elec-
troiyte leakage:

• Install the battery with the ‘‘©” and "©” polarities aligned properly.
•Remove the lithium battery if you do not intend to use the remote

control unit for a long time.

• Do not throw a lithium battery into a fire, subject it to short-circuit­

ing, disassemble it or apply heat to it.

The average life of a lithium battery is about one
year.

It is time to replace the battery when the remote control unit will not
function even when It is operated close to the system.

How to use the remote control unit properiy:

•Do not place obstacles between the remote control signal sensor

and remote control unit.

• Do not expose the remote control signal sensor to direct sunlight or

to the bright light of an invertor fluorescent light.

•Take care to keep the remote control signal sensor and end of the

remote control unit free from dust.

To prevent malfunctioning of the remote control

unit;

•Do not disassemble or remodel the unit,
• Do not place heavy objects on top of it.
• Do not leave it where it will be exposed to direct sunlight.
• Do not spill beverages or other liquids over it.

When the system is installed in a rack, the distance over which the

remote control unit can be operated may be reduced depending on

the thickness and color of the rack’s glass doors.

Advertising