Set \ ^mode^ programming the play end (off) time, Jjjd, Press set – Panasonic SC-CH150 User Manual

Page 35: Rwode^ (d press t or a to select the, Off ihd, 0 press set, Spuay/nrec press 0 play/h reg, To release, To check what has been programmed, Looa

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SET

\

^MODE^

Programming the play end

(OFF) time:

O Press

T

or

A

to select the

hours.

H O C - ~ l ' n

u i I ■ ■ ' '

' \

OFF

-JJJD

Press SET.

rwoDe^ (D Press

T

or

A

to select the

minutes.

--------------

OFF IHD-

N

OFF

I

0 Press SET.

[spuAY/nREc Press 0 PLAY/H REG.

looa

SPLAY

Lights.

Check that "Ca PLAY” has appeared on

the display.

10

Press POWER.

The sound is faded in and piay starts at
the programmed time.

iiimi

' if"''

HPLAY/BREC

To release:

(When you seiect CD or TAPE)

Press S PLAY/ca REC once to turn off

m

PLAY.

Each time this button is pressed, the dis-
piay changes as foiiows:

PLAY“

-off (-

(When you select TUNER)
Press □

PLAY/Ca REC

twice to turn off

□ REC.

Each time this button is pressed, the dis-
pay changes as follows:

m

PLAY—y[3 REC

'--------- off <----- ’

The timer does not operate but the pro­

grammed times will be stored in the
memory.

To check what has been programmed:

(Only when “[g PLAY” is on)

1. Press MENU.

2 .

Press TIMER.

3. Press MODE twice to display "H PLAY”.

The start time, end time, source and wake-up volume level are
displayed in sequence for about 3 seconds each.

To change what has been prbgrammed:

Repeat the procedure starting with step 1.

When

“ 0

PLAY” appears on the display, press 0 PLAY/0 REC to

go off

“ 0

PLAY” on the display, and repeat the procedure starting

with step

1

.

To use the play timer with the same timer setting:

1. Select the sound source, and set the volume of the sound you will

be awakened by.

2. Press 0 PLAY/0 REC and appear

“ 0

PLAY” on the display.

3. Press POWER and set the system to the standby mode.

To enjoy music or a program after programming:

1. start playing the music or listening to the program after step 9.

Even if the volume or sound source is changed, whatever has
been programmed will be restored at the wake-up time.

2. After finishing with the music or program, press POWER and set

the system to the standby mode.

•The timer will not work if the power is kept on.
•When the power is switched to the standby condition during timer

play, the play end time programming will be ignored even if the
power is turned back on and piay resumed.

•The play timer and unattended recording timer cannot be used in

combination.

For your reference:

Unless it is released, the wake-up timer will operate every day in
accordance with what has been programmed.

35

Advertising