Panasonic PV-HS1000 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a Satellite
Receiver to the Hard Disk
Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect the red and white Audio plugs of an AA/
cable from the AUDIO OUT jacks on your satellite
receiver to the LINE 2 INPUT jacks on the Hard Disk
Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the red and white Audio plugs of an AA/
cable from the LINE 2 OUTPUT jacks on the Hard
Disk Recorder to the AUDIO IN jacks on your
television, matching like colors.
5. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your television.
6. Attach the satellite receiver controller. See “Satellite
Receiver and Cable Box Controllers” on page 10.
7. Follow the C - E instructions on page 9 for telephone
connection, AC power connection, and setup.
Leave the yellow video cable unattached on your satellite
receiver, the Hard Disk Recorder and television.
Refer to your TV or satellite receiver owner’s manual for more
information on connecting to these components.
Connecting a Satellite Receiver
and A/V Receiver to the Hard
Disk Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect an /W cable from the AUDIO OUT jacks on
your satellite receiver to the LINE 2 INPUT jacks on
the Hard Disk Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the Audio cable from the AUDIO OUT jacks .
on your A/V receiver to the speakers. Then, connect
the S-Video cable from MONITOR OUT jack on your
/W receiver to the S-VIDEO IN jack on your
television. (Note: If you do not have separate
speakers, see step 4 on page 12.)
5. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your A/V receiver.
6. Connect an A/V cable from the AUDIO OUT jacks on
the Hard Disk Recorder to the IN jacks on your A/V
receiver, matching like colors.
7. Attach the satellite receiver controller. See “Satellite
Receiver and Cable Box Controllers” on page 10.
8. Follow the C ~ E instructions on page 9 for teiephone
connection, AC power connection, and setup.
Refer to your TV, satellite receiver, or AAT receiver owner's
manual for more information on connecting to these components.