Panasonic PV-HS1000 - Manual (Page 15)

Connecting a Cable Box,
Satellite Receiver,
AN
Receiver, and VCR to the
Hard Disk Recorder
1. Connect an RF cable from the OUT jack on your
cable box to the ANT/CATV IN jack on the Hard
Disk Recorder.
2. Connect an AA/ cable from the AUDIOA/IDEO
OUT jacks on your satellite receiver to the
INPUT jacks on the Hard Disk Recorder,
matching like colors.
3. Connect an AA/ cable from the OUTPUT jacks
on the Hard Disk Recorder to the AUDIOA/IDEO
IN jacks on your VCR, matching like colors.
4. Connect a second A/V cable from the OUTPUT
jacks on the Hard Disk Recorder to the AUDIO/
VIDEO IN jacks on your A/V receiver, matching
like colors.
5. Connect the Audio cable from the AUDIO OUT
jacks on your A/V receiver to the speakers.
Then, connect the Video cable from the
MONITOR OUT jack on your A/V receiver to the
VIDEO IN jack on your television. (Note: If you
do not have separate speakers, see step 4 on
page 12.)
6. Connect an A/V cable from the AUDIO VIDEO
OUT jacks on your VCR to the AUDIO/VIDEO IN
jacks on your A/V receiver, matching like colors.
7. Attach your cable box and satellite receiver
controllers. See "Satellite Receiver and Cable
Box Controllers” on page 10.
8. Follow the C~E instructions on page 9 for
telephone connection, AC power connection,
. and setup.
Refer to your TV, cable box, satellite receiver, A/V
receiver, or VCR owner’s manual for more information
on connecting to these components.
15