Specifications & information, General, Resetting hard disk recorder – Panasonic PV-HS1000 User Manual

Page 53: Screen burn in, Modem, Specifications and information, Specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications & Information

Specifications

General

Operating voltage

Power Consumption

Tuner

MTS

Input Connectors

Tuner

Composite
Audio
S-Video

120VAC 60Hz

27W {Power On)

19W {Power Off)

Type F

Phono

X

2

Phono(L+R)X 2

4-pin miniature DIN

Resetting Hard Disk Recorder

If the Hard Disk Recorder does not respond

when you press buttons on the remote, press
and hold the POWER button on the front of
the unit for 10 seconds. The Hard Disk

Recorder will start up in a few moments.

The Hard Disk Recorder’s green power LED
does not need to be lighted to record shows.

If you have a cable box or a satellite receiver,

however, these device must remain on for the

Hard Disk Recorder to record from them.

Output Connectors
Composite
Audio
S-Video-
Telephone
Serial Control

IR Blaster

DimensionsA/Veight
Height

Width

Depth

Weight {net)

AudioA/ideo Signals

Audio output level
Video output level
Video output impedance

Phono X 2
Phono(L+R)X 2

4-pin miniature DIN

RJ-11,2wire

DB-9

76mm
430mm
290mm
5.9kg

2-OVp-p

1.0Vp-p

75 ohm

Ooeratina/Storaae Conditions
Operating temp, range +5°C to +40”C
Storage temp, range -20°C to +55°C for 100 hours

Screen Burn In

When any image is displayed on a television
screen for an extended period of time, a
permanent mark can remain even after the

image is changed. This is called “screen burn
in.” Projection TVs are the most susceptible to

screen burn in. To prevent this, don’t leave the
Channel Guide, or any other screen displayed
when you don’t need to use them. You can
also adjust the brightness of the Hard Disk

Recorder screens to help prevent this. See

“Change Display Brightness” on page 7.

To dismiss the Pause on-screen image from your TV
screen and keep a show paused, press the EXIT
button on the remote control.

^

Record
HDD Capacity

Video compression format
Audio compression format

Recording level
Recording time

MODEM

Speed

20.4GB

MPEG2
MPEG1 Iayer2
Extended/Medium/High

20.0H/10.0H/6.5H*

56kbps

Actual available recording time is not maximum because the
“Welcome Video” is already recorded in the Replay Guide.
To make the most of the available recording time, delete the
welcome video from the Replay Guide or save it to a

videotape.

53

Advertising