Battery charge, Battery saver mode, To check the battery strength – Panasonic SOUND CHANGER KX-T4168-B User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Battery Charge

Place the handset on the base unit for

10 hours.

—The IN USE/CHARGE indicator

lights.

IN USE/CHARGE Indicator

Battery saver mode

The handset goes into battery saver mode 5 minutes after you finished

using the handset (ex. such as making a call, viewing the caller list, etc.).

In this mode, the display is blank, but the handset receives calls.

To exit the battery saver mode, use the handset again. The display
automatically ‘wakes up’ from ‘sleeping’.

To check the battery strength

You can check the present battery strength while the handset is in the
battery saver or stand-by mode.

Press (El)

(

ватт

key).

—If the display is blank, press one of the function keys to turn the display

on.

The display shows the present battery strength as shown in the chart

below.

Display prompt

Battery strength

( I I I ]

Fully charged

( I I ]

Medium

(

l ]

Low

11

Advertising