To dial after confirming the entered number, To redial the last number, To select the receiver volume – Panasonic SOUND CHANGER KX-T4168-B User Manual
Page 17: If noise interferes with the conversation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note:
—If
“OUT OF RANGE”
is displayed and an alarm tone sounds in step 1,
move closer to the base unit or place the handset on the base unit.
Then try again.
To dial after confirming the entered number
Enter a phone number
1
—It you enter a wrong number, press
(
delet
key) to make a correction
by one digit from the right side.
—To cancel, press (
exit
key).
Press (
f
TI
{
dial
key).
—The display starts counting the call
duration.
To redial the last number
Press [TALK], then [REDIAUt^USEl.
To select the receiver volume
You can select the receiver volume between HIGH and NORMAL during a
call with the handset. NORMAL is the factory setting.
Press (VOLUME/RING^.
—Each time you press, you hear the next volume setting.
If noise interferes with the conversation
Press [CH] to select a clear channel or move closer to the base unit.
—The selected channel number is displayed.
7 7