Panasonic CT-2786VYD - Manual (Page 19)

Set-Up Features
Set Time
Clock (when set) will display on screen at initial ‘Turn On",
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On Is activated.
Press ACTION button on the TV or Remote (some
models).
Press A / ▼ and M ^ buttons to highlight the
Set-Up Icon.
Press ACTION button to display the Set-Up Menu.
1 .
2
.
3.
NOTE: For model CT-2786Y, the ANT, AUTO PROG,
and MANUAL PROG selections will not be
displayed in the Set-Up menus.
4. Press ^ ^ button to set hours (set AM/PM
accordingly).
5. Press ▼ button to select minutes position.
6. Press ^ button repeatedly to set minutes.
7. Press ACTION button twice to exit menus.
Antenna (Ant)
ct -2786VY only
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Monitor is not connected to a
cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Monitor is connected to a
Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
1. Press ACTION button on the TV or Remote (some
models).
2. Press A / T a n d ^ / ► buttons to highlight the
Set-Up Icon.
3. Press ACTION button to display the Set-Up Menu.
4. Press V button to highlight ANT.
5. Press ^ button to select TV or CABLE.
6. Press ACTION button twice to exit menus.
Auto Prog (CT-2786VY only)
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
1. Press ACTION button on the TV or Remote (some
models).
2. Press
A
/ ▼ and ^ ^ buttons to highlight the
Set-Up Icon.
3. Press ACTION button to display the Set-Up Menu.
4. Press ▼ button to highlight AUTO PROG.
5. Press ^ ^ button to start Auto Programming.
Channels will automatically advance until all channels
have been scanned.
6. Press ACTION button twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-
19
-