Operation, Optional equipment connection, Video/audio in & out connections – Panasonic CT-2786VYD User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Optional Equipment Connection
&
Operation
Video/Audio In & Out Connections
The IN and OUT terminals located on the back of the Monitor directly pass the input signals through the out terminals, so
you may monitor or record the external Video/Audio information.
Operation
1. Connect an external Video/Audio source to the Monitor VIDEO IN terminals as shown.
2. Select video mode by pressing the TV/Video button {some models).
3. Connect the same Video/Audio THROUGH OUT jacks to a Monitor or VCR as shown. Monitor will be operating with
the external Video/Audio signals. The THROUGH OUT jacks will provide the same signals for monitoring or
recording.
NOTE: Video/Audio IN and OUT terminals will operate whether the Monitor is ON or OFF.
Use BNC or S-Video Connection for Video
Out (The Out Terminal will be the same as the
Video Input Source).
Terminals on Back of Monitor
OR
---------1.
lo
I
a a
Audio (RCA Plug)
VCR
NOT USED IN CT-2786YD
Monitor
® m
IN
S-VIDEO
OUT
it
External Audio/Video
Equipment
-
8
-