Incoming cable from home antenna, Incoming cable from cable company, 75 ohm – Panasonic CT-2786VYD User Manual
Page 7: Installation, Antenna/cable connections, Other video equipment, Cont.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
(cont.)
Antenna/Cable Connections
(
ct
-2786
vyd
only)
Antenna Connection - For proper reception of VHF/UHF channels, an external
antenna is required. For best reception an outdoor antenna is recommended.
Antenna Mode must be set to TV. (Refer to Antenna Mode section.)
Incoming Cable from Home Antenna
Indoor
Typical VHF/UHF Antenna
75 Ohm
VHF/UHF
on Back
Of
Set
300 Ohm
VHF/UHF
on Back of Set
or
300 to 75 ohm Matching Trans
former (Supplied 13" Models Only)
Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. Antenna
Mode must be set to CABLE. (Refer to Antenna Mode section.)
Incoming Cable from Cable Company
75 Ohm
VHF/UHF
on Back of Set
NOTE: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A
cable converter box is required for proper reception. Check with your local Cable company for compatibility
requirements.
Other Video Equipment
VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna input
connection (some models).
-
7
-