Panasonic CT-2786VYD - Manual (Page 21)

Instant-On Feature
This Monitor has an Instant-On feature which automatically turns the unit ON when AC power is supplied.
This feature initiates the Monitor to turn ON automatically when using it with other equipment connected to a main power
supply switch. (Such as: AC power strip or when plugged directly into the back of a computer.)
Once initial power has been supplied and the Monitor turns ON, the POWER switch located on the front of the Monitor
may be used to turn the Monitor OFF and ON as desired.
NOTE: This feature can also be activated with Auto Power On feature, located in the Set-up menu.
AC Power Strip Connection
Procedure for Instant-On feature
With the Monitor turned ON, press the ACTION and VOL LEFT (^) buttons on the Control panel simultaneously, then
quickly press the ACTION and DOWN (▼) buttons on the Control panel simultaneously. This will activate the Instant-On
feature, to deactivate repeat procedure.
NOTE: There will be no On-Screen display.
To confirm if the Instant-On feature is activated. Turn the Monitor OFF, then unplug it and plug it back in. The Monitor
should turn on automatically.
Control Panel Lock Feature
Procedure for Control Panel Lock feature
With the Monitor turned ON, press the ACTION and VOL RIGHT ( ►) buttons simultaneously, then quickly press the
ACTION and UP ( A) buttons simultaneously. This will activate the Keyboard Lock feature, to deactivate repeat
procedure.
NOTE: There will be no On Screen display.
To confirm if the Control Panel Lock feature is activated, press any button other than the POWER button (the Power
button is never disabled).
-21
-